|
|
|
RDAc Compact...........................................................
The RDAc Compact is a SMART RTU device with integrated I/O’s to perform remote data acquisition and control functions.
With the various wired and wireless communication interfaces it integrates effectively into existing and new management executions systems.
RDAc COMPACT FEATURES:
10 x Isolated Digital Inputs,5 x 1 Amp Relay Outputs,
4 x Non-Isolated Analog Inputs,2 x Non-Isolated Analog Outputs,
2 x RS232 Ports,RS485 Port,10/100 BaseT Ethernet Port,USB Master/Slave,
Integrated GSM/GPRS,SD Card data backup, Integrated LCD Display,
Navigational Keypad,HTTP Server,FTP Server, Client configurable for custom applications engine
RDAC IIb .................................................................
The RDAc II and RDAc IIb is a remote data accusition and
controll device. It has onboard memory for data storage
for 48 channels for up to 5 days, 48 records per channel
per day. The RDAc II is fully programmable using function
blocks while the IIb is configured through excell
configuration pages. Modbus communication to various slave
units includes ION, Elster, Ennermax, M-Systems and RDAc IO.
Serial 232, 485, or ethernet communication. 24V DC or 15Vac.
Data processing of energy and process data, RDAc Tool Software
to configure data analyses. The RDAc II and IIb has been
discontinued and has been replaced by the RDAc III.
Download "RDAcIIMap.pdf" (File Size:
140Kb)
RDAC III........................................................................
The RDAc III is an easy to use, versitile data concentrator. It succeeds the RDAc IIb product. Data
as well as configuration resides on a SD storrage card capable
of holding up to 3 months data for 48 channels. Data alarms
through biuld in GPRS, - serial 232, 485, Ethernet comunication.
Extended channel grouping, Network Tag capabilities.
Web interface for data display and remote configuration. Remote firmware updating.
RDAc Tool PC interface as with its predecessor.
Intelegance configurable BMO Basic scripts. Configureable by means of Excel template pages.
Modbus communication to ION, Elster, Enermax, M-Systems,
Supercon, Dirus and CSoft.
Download latest Mod A firmware. (File Size 1.2Mb);
Latest Mod B firmware. (File Size 1.2Mb)
Download Owners Manual. (Size 7.22Mb)
Basic Script Manual.(Size 141Kb)
RDAc Compact....................................................................
RDAC Compact MODEL: P07007A1
Low Power multi-function IO Remote
Logger with built in GPRS communication.
Links the local display and the keypad for
user and site information.
- 128 x 64 Graphical display
- 25-key keypad
- Wide Power Supply range
- Multi IO - A&D
- RS485 and RS232 interface
- Terminal Block connectors
- Low Power function
- Storage capacity
- SMS Alarm functionality
- Software Tool for configuration.
Download Owners Manual.(File Size 290Kb)
RDAc Nano.........................................................................
MODEL: P08014A1 is a Low Power Multi Input Remote-Logger with built in GPRS communication.
FEATURES
•Wide Power Supply range (10 VDC – 30VDC)
•Multi IO:4 Di,1 Ai
•GPS Functionality Optional
•RS232 interface
•Terminal Block connectors
•Low Power function for Battery
operation
- RTC clock function
•Non-Volatile Storage capacity
•SMS Alarm functionality
•SMS Configuration functionality
•Equipped with a Software Tool for
operation and configuration
RDAc IO.........................................................................
RDAC IO MODEL: P01003A1
Semi universal low cost 16 channel I/O processor. Part of the series – II RDAc family.
FEATURES
•8 Bit CPU
•Combination of I/O for the16 channels
with max of:
1.8 – Digital Inputs
2.8 - Analog Inputs ( 0-5V )
3.8 - Relay Outputs ( 1A@30Vdc)
4.Counters :
a)High Speed Counters Channel 1 – 8
Pulse Rate : 200Hz
Pulse width : 2ms
b)Slow Speed Counters Channel 9 – 16
Pulse Rate : 50Hz
Pulse Width : 20ms. •RS485 or RS232
•Channel Led indicators
•Communications indicators
•Panel mounted module
•Standard modbus RTU communications Protocol
•All I/O functions available in 4000X registers
•Multi address support for 485 multi drop.
Download Owners Manual.(File Size 271Kb)
RDAc uIO.....................................................................
The Micro RDAc I/O MODEL P01001A1 fits into the bottom end of the RDAc range, with a smaller number of inputs and outputs.
Serial Interface to the device is via RS485 or RS232 using a Modbus RTU protocol.
FEATURES
•8 Bit Cpu
•Small Form Factor DIN rail
•8 Digital inputs or
8 Digital outputs or
8 Analogue inputs or
any combination of the above
up to 8 channels
•Lightning protected RS485 interface
•Analogue Inputs 0 – 5V
(Accuracy 0.5 % of span)
•RS485 connected via screw terminals
•Jumper selectable RS485
Line termination
•Analog Non Isolated single ended (0-5V)
•Digital Input Non Isolated 5-24V
(Source input 1mA)
•Digital Output Non Isolated
Non protected open collector output
(100mA sink)
•Counter or pulse input speed (50Hz max).Download Owners Manual. (File Size 205Kb)
RDAc PSU.....................................................................
The RDAc Power Supply Unit-MODEL: P99002A1 uses offline switch mode technology to provide a regulated DC output of 24VDC with 110VAC – 220VAC input.
FEATURES
•Wide AC supply-range for output.
•Output short circuit protected.
•Internal Battery Charge for back feature.
•Led indications:
•CHARGE = Busy charging.
•OVER CURRENT = Short circuit on load.
•BATT. LOW = Battery voltage too low.
•V – OUT = Output voltage status.
•V – IN = Input voltage status.
•V – OK = Indicates system all clear. Download Owners Manual. (File Size 154Kb)
485/422/Fiber.....................................................................
MODEL: P00019A1 RS422/485 to Fiber Converter provides a means to extend the
RS422/485 bus using a Fiber Optic Loop instead of the normal twisted pair cables as per EIA- 422 spec.
This enables greater bus lengths and operation in noisier environments.
FEATURES
•Standard ST Fiber connectors.
•Multi-mode Fibers of 50um / 125um supported
•Fiber selectable for Peer to Peer or Ring network
•1.5 Km total Fiber loop distance
•Lightning protection on RS485 /RS422
•Automatic network swing on RS485 with selectable times
•Transmit and receive indication lights
232/Fiber ........................................................................
MODEL : P99030A1, the Serial Comms Interface is a single channel RS232 to Fiber Converter. It uses a RJ11 modular socket on the RS232 side. A RJ11 to 9Pin female D – Type Interface cable is supplied with the unit.
FEATURES
Led Indication
A) Indication of receive and transmit Signals.
B) Power Supply Indications.
Small and attractive.
Baud Rate Range:1200 – 19200
Baud Rate selectable via dipswitch.
This Module can be used in two modes:
A) RING NETWORK MODE
B) PEER TO PEER MODE
Easy to use.
Comms interface ..............................................................
MODEL: PRDCOM01 is a SCI unit that converts RS-232 communications signal levels
to the correct electrical signals required by RS-485/422.
The RS-485/422 communications standard is recommended when many modules, or addressable devices, must be connected to a host computer and over long distances. The converters allow communications bus lengths up to 2 000 meters and baud rates up to 38 400 KB using one or two twisted pair of wires.
The RS-485 comms standard is half-duplex; data transmitted in one direction at a time. Normally the bus direction is controlled by the user via a control signal but with
the SCI converter it is automatically controlled without external handshaking signals from the host. Therefore, host software written for RS-232 may be used without modification, making the RS-485
bus control completely transparent to the user.
Profibus Protocol Converter ...............................................
MODEL: P02007C1, TEC Communicator can connect almost any product with a serial RS-232/485 communication interface to a Fieldbus.
The tec convertor performs an conversion between the serial protocol and a Profibus DP network.
Custom serial port communication protocols can be implemented on request.
FEATURES:
Siemens ASIC DPC31 PROFIBUS CONTROLLER
V1SL Slave firmware Vers 1.3
DPV0/1 Protocol
Galvanic Isolated DP interface with on board DC/DC converter
PROFIBUS DPV1 RS485 interface with a 9-pin D shell female connector
Alarm Handling
Acyclic communications
Baud rates: 9.6k, 19.2k, 45.45kBd, 93.75kBd, 187.5kBd, 500kbd, 1.5MBd, 3Mbd, 6MBd, 12MBd, automatic recognition
Dipswitch device address 1-255, easier for 'field' adjustment.
Status LED indicators for PROFIBUS and serial ports
Local serial port with switch selectable baud-rate and line control..
|
|
 |
